CAT 7A S-FTP patch cord, Cu, CMR Riser AWG 24/7, length 100 ft, color blue

The high-end network solution according to the CAT 7A standard

• Reach a bandwidth of up to 1500 MHz
• With Fire rated CMR cable jacket, often called “riser-rated cable,” is constructed to prevent fires from spreading floor to floor in vertical installations. It can be used when cables need to be run between floors through risers or vertical shafts.
• AWG24 cu cord is thicker than AWG26,AWG28, which means durable and longer life
• Transparent red coloured metal shielded connector for easy identification of Category 7A (1500 MHz) 
• Inner conductors: Copper (Cu) 
• PoE++ compatible 

The Sunnytech Cat.7A S/FTP installation cable is characterized by the following cable construction 4x2x AWG24/1 and reaches a transmission frequency up to 1500 MHz. The halogen free cable jacket is conform to the standard IEC 60332-3-24, FRNC-C, LSZH-3 and CPR Euro class Dca. The cable is suitable for building structured cabling in the secondary and tertiary area. Compliant with the following standards ISO/IEC 11801, DIN EN 50173, DIN EN 50288-9-1.

Technical Details

• 2 x RJ45 connectors (8P8C)
• Covers with kink protection, strain relief and locking lever protection
• Length designation on the covers
• Inner conductor: Copper (Cu)
• Pin assignment: 1:1
• Category: 7A
• AWG cross-section: 24
• Anti-kink sleeve: molded
• Connector 1 type: RJ45 8(8)
• Connector 2 type: RJ45 8(8)
• Cable construction: 4 x 2
• Flame retardant version: yes
• Anti-kink sleeve color: Blue
• Locking lever protection: yes
• NVP value: 76
• Sheath color: Blue
• Length: 100 ft
• Slim Version: no
• Length: 100 ft
• Category: CAT 7A
• Color: Blue
• Configuration: 1:1
• Jacket: With Fire rated CMR cable jacket
• Shielding: S-FTP, pairs in metal foil and braid shielding
• Structure: 4 x 2 AWG 24/7, twisted pair